Dosing system GENODOS® DM-T – water disinfection with GENO®-Chlor A

Dosing system GENODOS® DM-T controls the flow-dependent dosing of GENO®-Chlor A to disinfect drinking and process water. The system is based on a dosing volume of 1.0 mg of free chlorine per litre of water in drinking water treatment. In the workflow, the contact water meter with pulse transmitter defines the timing for volume-dependent control of the dosing pump. Consistent drinking water quality is guaranteed through the addition of the active agent in proportion to the volume of water. The dosing agent is extracted directly from the disposable container via a suction lance. In dosing systems DM-T 80 and DM-T 100, the dosing tank is fitted with a suction hose and empty signal.

  • Dosing of GENO-Chlor A
  • Dosing pump GENODOS® type GP
  • Nominal pressure PN 10 bar
  • Nominal output up to 100 m³/h
  • Contact water meter with pulse cable
  • Dosing tank 60 and 200 litres

Installation requirements

In disinfection procedures, the materials used must be checked on site to determine their resistance to chemicals and corrosion. The installation site must be frost-proof and the system protected against sunlight, chemicals, dyes, solvents and vapours. The ambient temperature should not exceed 30°C. According to EN 1717, dosing systems in drinking water treatment are to be protected by means of a system separator if they are connected to the public drinking water network.

Scope of supply

  • self-priming, continuously adjustable diaphragm dosing pump, automatically deaerating against pressure, synchronous motor 230 V / 50/60 Hz with connection option for empty signal, external control and voltage-free fault signal output
  • GENODOS® pump GP-1/40
  • Contact water meter with pulse cable to the GENODOS® pump
  • Dosing group 2.70 in PVC with non-return valve
  • Pressure retention valve DHV4 10 bar, hose (PTFE) di=4; da=6
  • Suction lance for disposable canister (DM-T 6 - DM-T 10)
  • Complete dosing tank 60 l and suction lance with empty signal (DM-T 20 / DM-T 30)
  • Complete dosing tank for 200 l and suction lance with empty signal (DM-T 80 / DM-T 100)

Scope of supply for accessories

  • Test kit for chlorine and pH value
  • Dosing group 2.72

For further information on installation requirements and scope of supply, as well as technical details, see the product data sheet, which is available to download.