The nanofiltration system ion selector NANO-X is designed for the partial demineralisation of raw water whose composition complies with the quality requirements of the German TrinkwV (German Drinking Water Ordinance). The nanofiltration system ion selector NANO-X works according to the membrane process. In the selection process, aqueous solutions of different concentrations are separated by a nanofiltration membrane. The special feature of the nanofiltration process is that a distinction between monovalent and multivalent ions can be made, i.e. monovalent ions can pass through the membrane to a high extent while salts with polyvalent ions are retained. A particular advantage of the nanofiltration technology is the fact that - apart from the removal of dissolved salts - bacteria, germs and dissolved organic substances are also reduced.
Observe local installation directives, general guidelines and technical specifications.
The installation site must be frost-proof. The system must be protected from chemicals, dyes, solvents and vapours. Always install a drinking water filter (50 or 80 µm) and - if necessary - a pressure reducer (e.g. BOXER® KD) as well as a Euro system separator GENO®-DK 2, ½ “ upstream of the systems. For the electrical connection, a supply line to the system must be provided by others acc. to the wiring diagram. This line must be dimensioned according to the system type. The installation of a nanofiltration system represents a major interference with the drinking water system. Therefore, only authorised experts may install such systems.
For additional information on installation requirements and accessories as well as technical details, please refer to the product data sheet which is available for download.