Top class performance winner – The water softener softliQ:MD32.

The water softener softliQ:MD32 softens water according to the water consumption. The softliQ:MD32 is the soft water expert that gets smarter every day because it learns from you. First, it determines your average consumption for every day of the week and then controls its softening performance subject to the respective day. In addition, it checks and optimises this consumption profile on a daily basis. Its two exchanger tanks ensure stagnation-free softening in phases of low withdrawal and full capacity in case of high water demand. The softening strategy is determined by pre-selection: Eco, Power, Comfort or Individual. The softliQ:MD32 system operates according to the ion exchange principle and features a fully automatic control unit as well as a wear-optimised control valve. Based on the set raw water hardness and the water withdrawals, the water softener adapts to the conditions prevailing on site. The new softliQ:MD32 system thus ensures premium water quality for your home and sustainability for the environment. The innovative softliQ:MD32 system can be controlled via the integrated colour touch display or Grünbeck's myProduct app.

The water sensor integrated in your softliQ system provides you with even more safety. It monitors the system site and detects potential water leaks. Thanks to the app connection, you will be  informed immediately - even when you are on the move. For the safety you deserve.

Observe local installation directives, general guidelines and technical specifications. The installation site must be frost-proof and ensure the system's protection from chemicals, dyes, solvents and vapours. Always install a drinking water filter and, if required, a pressure reducer (e.g. pureliQ:KD) upstream of the systems. For the electrical connection, a shock-proof socket is required within a range of up to approx. 1.2 m of the system.
A drain connection must be provided to discharge the regeneration water. In case the flushing water is directed to a lifting system, make sure that said device is salt water proof. The installation room must have a floor drain. If this is not the case, an appropriate safety system (e.g. protectliQ) has to be installed.  A cold water withdrawal point must be available downstream of the system and in close proximity to it. If the softened water is intended for human consumption as defined by the German Drinking Water Ordinance, the ambient temperature must not rise above 25 °C. In case of applications that are purely technical, the ambient temperature must not exceed 40 °C.

Water softener incl.

• Connection equipment
• Water sensor
• Illuminated LED ring
• Indication of salt supply
• Audio signal

Water test kit „Total hardness“
Operation manual

• Dosing computer EXADOS EK 6 softliQ
• Dosing computer EXADOS ES 6 softliQ
• Safety device protectliQ:A20
• Delivery pump for regeneration water
• Drain connection DN 50
• Extension kit for connection hoses DN 25
• Connection angle 90 °-1“ (2 pcs)

• Regeneration salt (25 kg) acc. to EN 973 type A
• Water text kit “Total hardness”

For additional information on installation requirements and accessories as well as technical details, please refer to the product data sheet which is available for download.