GENO-mat® WF – water softening on an industrial scale

The GENO-mat® WF range of water softeners is intended for the softening and partial softening of drinking water and process water. They primarily operate in industrial applications with a defined water consumption in areas in which soft water is not constantly required. The water softeners use the principle of ion exchange. With full salting, the GENO-mat® WF softens to less than 0.1 dH in industrial applications, and with economy salting is a popular choice among the trades. A blending unit (optional) blends to water to hardness range 1. The GENO-mat® WF systems have an integrated bypass for the supply of raw water during regeneration, which is volume-controlled. The water softeners are available in five sizes from 2.0 m³/h to 9.5 m³/h maximum flow.

  • Single system
  • Volume control
  • Control head made of red bronze
  • Economy salting (with disinfection device)
  • Alternatively: Full salting for a residual hardness of ≤ 0.1 °dH
  • Application area: 2.0 - 9.5 m³/h

Installation requirements

Please note local installation directives, general guidelines and technical specifications. A fine filter must always be installed upstream of the system. The systems must be protected in accordance with DIN 1988, part 4 (e.g.: system separator). The installation site must be frost-proof and the system protected against chemicals, dyes, solvents and vapours. The ambient temperature as well as the radiation temperature next to the system must not exceed 40 °C.

Scope of supply

Water softener GENO-mat® WF complete with

  • Water test kit “Total hardness”

Accessories

  • Disinfection device (electrolysis method, standard equipment for systems with economy salting)
  • Blending
  • Water meter with counter
  • Mounting set, two alternatives
  • Voltage-free signal for display of operating state

For further information on installation requirements and accessories, as well as technical details, see the product data sheet, which is available to download..